What did you do on your "R" today

[Anonymous]

I have build a special RB the last months.
Found the chassis in Holland and the swingarm in the UK.
The flowed cilinderhead is from Germany and the pvm wheels are from a cb750F partsbike.
The complete seat was on a cb900F partsbike.
This bike has a new wiseco 1123cc kit and new keihin CR race carbs.
The engine is complete rebuild this winter.
The laser exhaust comes from my own cb900F, bought it new in 1987.
Everything has a fresh paint and the bike is ready for the road.
Very happy again with this nice RB.

[ATTACH=CONFIG]1133[/ATTACH]

[Trevor Hughes]

@WoutV 2319 wrote:

I have build a special RB the last months.
Found the chassis in Holland and the swingarm in the UK.
The flowed cilinderhead is from Germany and the pvm wheels are from a cb750F partsbike.
The complete seat was on a cb900F partsbike.
This bike has a new wiseco 1123cc kit and new keihin CR race carbs.
The engine is complete rebuild this winter.
The laser exhaust comes from my own cb900F, bought it new in 1987.
Everything has a fresh paint and the bike is ready for the road.
Very happy again with this nice RB.

[ATTACH=CONFIG]1133[/ATTACH]

Another sweet RB Wout.

[NiccoloP]

@WoutV 2319 wrote:

… and the swingarm in the UK.

Hey Wout, congrats for your bike!
I’m looking for a swingarm like yours, what brand is that?

[Anonymous]

@NiccoloP 2325 wrote:

Hey Wout, congrats for your bike!
I’m looking for a swingarm like yours, what brand is that?

Sorry Niccolo i don,t know what brand it is.
It can be metmachex but i,m not sure.

Wout.

[NiccoloP]

Wout thanks anyway.
As you probably have your original swingarm down, any chance you can take some measure?
I’m thinking to adapt something as well and before buying one I’d like to see if it may fit.

If possible I would like to know

-length eye to eye
-width of the front axle
-width of the rear axle

thanks in advance

[SteveB]

@NiccoloP 2325 wrote:

Hey Wout, congrats for your bike!
I’m looking for a swingarm like yours, what brand is that?

http://www.ebay.co.uk/itm/DAVIDA-SWINGARMCBX1000CB900FCB750FSIMILAR-TO-JMCMETMACHEX-/390638996459

[NiccoloP]

Thanks Steve,
I’ve seen that swingarm , but I’m looking for an aluminium one (I’v talked with the seller and that one is steel)

[BrianC]

She lives and breathes again!! Fired up the D this arvo. No leaks (yet), oil pressure, volts, noise (the right ones) and a bit of that fresh hot paint smell -mmmmmm.
Doesn’t even sound like it needs a tune!! Idles, revs, but I’m sure it’ll need a bit.
Now for the body work bits. Only 30 months so far, a blistering pace.

[SteveB]

today
I have bought a NOS tyre pressure gauge for my toolkit, all I need now is the cloth bag and the “C” spanner for the shocks.
£27.00 inc post from USA
steve

[TerryC]

Steve
I bought the C spanner from CBXspares in the US for $65 each, I also bough a Honda Goldwing tool kit and got the whole package including cloth pouch
Terry

[Anonymous]

I have a few new projects for this winter.
[ATTACH=CONFIG]1181[/ATTACH]

[Glenn Kirkham]

Hi Wout – I hope those are not the three you are bringing to the IOM next year…

[Anonymous]

No Glenn for the IOM we will need 3 dual seaters.
May be the special RB and 2 RC,s.

[Trevor Hughes]

@WoutV 2462 wrote:

I have a few new projects for this winter.
[ATTACH=CONFIG]1181[/ATTACH]

just a fee parts needed then Wout!!!!

[Trevor Hughes]

@TrevH 2466 wrote:

just a fee parts needed then Wout!!!!

Doh! Just a few parts needed.

[Author]

Posts