Forum Replies Created

Viewing 15 posts - 1 through 15 (of 21 total)
  • Author
    Posts
  • in reply to: New member introductions #13379
    VinceS
    Member

    Robert,

    Congrats on finding an RD in such great condition! Hope you put many many miles on it.

    Peace
    Vince

    in reply to: Urgent Need Stator for CB1100RC #13367
    VinceS
    Member

    Thanks to Glenn, Nick, John, Andre, and Trevor for all the support in finding resources for the 1100R Stator and Rotors.

    I have learned lots… and really appreciate everyone taking time to help me sort this out.

    There is a local source, about 1 hour 45 mins from my house. I was able to remove the rotor this afternoon and then drive to Ricks Motorsport Electrics in New Hampshire. They actually had the stator in stock ready to go, however it had the square plug like on the F bikes. They are going to install the round plug from the R stator. My rotor actually read 4.6 ohms which i think is good, none the less I am having them rebuild the it.

    Cheers Everyone!!! Awesome Support

    Very grateful :)

    VinceS
    Member

    Thanks John

    in reply to: Temp gauge reads max with key on motor not running #13361
    VinceS
    Member

    Found the wire from the sensor going under the starter cover was pinched. It had been repaired at some point in the past. Temp gauge working fine now.

    Thanks for pointing me in right direction.

    in reply to: Re Copied R Manual #13360
    VinceS
    Member

    John,

    Received the manual. It is just as you described. Perfect.

    Thank You.

    Peace
    Vince

    in reply to: Temp gauge reads max with key on motor not running #13359
    VinceS
    Member

    Thank you for replying John. I am going to check the wiring as well.

    in reply to: Re Copied R Manual #13355
    VinceS
    Member

    John,

    Sent you an e-mail.

    Peace
    Vince

    in reply to: Nylon/plastic fairing retaining washers for fairing #13353
    VinceS
    Member

    Glenn,

    Thanks for the idea. Pretty creative. Didn’t think of that. I already bought 3 packages of 10…

    Peace
    Vince

    in reply to: New member from Italy #13346
    VinceS
    Member

    Francesco

    Welcome. Congratulations on getting a CB1100R. Can you post a picture?

    Vince

    in reply to: Need one fairing screw #13345
    VinceS
    Member

    Thanks Andre still had some.

    in reply to: Need one fairing screw #13343
    VinceS
    Member

    No one has one… in all the R world?

    Has to be one out there somewhere…

    in reply to: Re Copied R Manual #13340
    VinceS
    Member

    All 148 pages. Be nice to make available to everyone who would like.

    Edit 3/28/2019 I am uploading the manual to cb1100f.net forum as well.

    in reply to: Need one fairing screw #13336
    VinceS
    Member

    Glen,

    Thanks for reply… which ones on ebay?

    Peace
    Vince

    in reply to: Need one fairing screw #13330
    VinceS
    Member

    Steve

    Thanks for replying. Hope someone has one :)

    Peace
    Vince

    in reply to: Oil light wiring #13315
    VinceS
    Member

    I had same issue once. The wire goes under the starter cover. I had changed the starter and pinched when putting everything back together.

    Was simple fix.

Viewing 15 posts - 1 through 15 (of 21 total)