Donington Classic Motorcycle Festival – August 2016

Home Forums CB1100R Owners Club Forum Donington Classic Motorcycle Festival – August 2016

  • This topic is empty.
Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #9693
    GarethR
    Member

    So… who’s going this year?

    It was a fantastic weekend last year and the chance to run round the track with Haslam, Spencer, Parrish et al was superb, even if I only saw the back of their bikes disappear into the distance !

    #12850
    Steve Doyle
    Keymaster

    Definately planning on being there. I saw Ron twice every lap of mine!!

    #12871
    SteveB
    Member

    I would like to be there, is the club getting a stand and tickets ?

    http://www.donington-park.co.uk/events/motorcycle/donington-classic-motorcycle-festival/10058/#event

    #12873
    Glenn Kirkham
    Keymaster

    Yes we have an invite, parade lap (?) places and our super slick new Gazebo on show this year.. Looking forward to it.. :-)

    #12875
    GarethR
    Member

    Fantastic !! Do you want my bike on the stand Glenn or do you have enough?

    #12876
    Glenn Kirkham
    Keymaster

    Hi Gareth – it would be good to have it on the stand as you are going to be there in any case… it’s an RD I think…?

    #12881
    GarethR
    Member

    Yes Glenn it is an RD and it will be in race trim with most of the shiny, glassy bits taken off for Spa. Having said that the starter clutch has failed, and the LHS of the bike is in bits as I try to rebuild / replace / modify the sprag clutch. Grrrrr!

    #12882
    Keith Goodman
    Participant

    Hi Gareth, there is a solution for the R starter clutch problem, and that is to use a 1999-2001 Yamaha R6 5EB sprag, you will need a cb750/cb900f starter clutch hub and starter gear

    As you can see from the photo the R6 sprag has around 20 teeth to grip rather than 3 rollers, and you use 6 bolts to secure it

    I have been using this mod on my CB1100F Hondas (2) for 3 years now with no problems, always grips never slips

    If you send me your email i will forward you a word document with full details

    Keith

    [IMG]http://www.cb1100r.net/forum/attachment.php?attachmentid=1702&stc=1[/IMG][IMG]http://www.cb1100r.net/forum/attachment.php?attachmentid=1703&stc=1[/IMG][IMG]http://www.cb1100r.net/forum/attachment.php?attachmentid=1704&stc=1[/IMG][IMG]http://www.cb1100r.net/forum/attachment.php?attachmentid=1705&stc=1[/IMG]

    #12883
    SteveB
    Member

    Keith,
    I think might be a market for you here, selling a complete modified sprag clutch ready to fit on !
    Put me down for the first one please.
    Steveb:D

    #12884
    SteveB
    Member

    Keith,
    I think might be a market for you here, selling a complete modified sprag clutch ready to fit on !
    Put me down for the first one please.
    Steveb:D

    #12885
    Glenn Kirkham
    Keymaster

    This would make a good piece for the club mag too Keith..
    Please forward to me or Andy Larkin if you’re happy to let us use it. 😃

    #12887
    Keith Goodman
    Participant

    I have already sent Andy the word document a couple of months ago Glenn

    Keith

    #12890
    SteveG
    Member

    It’s a well known problem of course, but we don’t pay much mind to is until the bloody starter clutch goes. In my case at the worst possible times. I’ve had two go now in the past 2 years and I’m out of spares
    so will be looking at this Yamaha conversion. Seems the priciest item is the Yam Sprag itself.

    #12891
    1100rAdmin
    Member

    Chaps… have moved the Start Motor Clutch topic onto a new Thread. Don’t post Starter motor replies here. This thread will continue for Donington Motorcycle Festival topic.

    Cheers
    😎

Viewing 14 posts - 1 through 14 (of 14 total)
  • You must be logged in to reply to this topic.