Forum Replies Created

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • July 1, 2020 at 1:41 am in reply to: Mirrors #13465
    JohnM
    Member

    Hi Glen, on to it, thanks.
    Regards
    John

    August 26, 2016 at 5:29 am in reply to: Rough Running/Spark Units #12990
    JohnM
    Member

    Hi BrianC
    I sent you a private message with my mobile number, did you get it.
    JohnM

    August 22, 2016 at 4:34 am in reply to: Rough Running/Spark Units #12972
    JohnM
    Member

    My RD has the same problem, started her up after a couple of month’s and she would only run on one cylinder, using NGK D9EA with standard coils. I cleaned the connectors on the spark units and the plugs and would still fire on olny one cylinder, I put in new plugs and everything is running good now. The spark units have the red sleeve, this has happened about 4 times since I got the bike in June 2015. Is there something else I need to do, all advice welcome.
    JohnM

    April 21, 2016 at 1:15 am in reply to: Workshop Manual #12825
    JohnM
    Member

    And who said you can’t win the lotto.
    JohnM

    March 30, 2016 at 1:51 pm in reply to: New Replica Exhaust System #12814
    JohnM
    Member

    Hi Brett
    They look like a good fit, thanks.
    JohnM

    March 28, 2016 at 7:43 am in reply to: New Replica Exhaust System #12805
    JohnM
    Member

    Hi Brett
    Thanks for the info.
    JohnM

    March 28, 2016 at 3:04 am in reply to: New Replica Exhaust System #12803
    JohnM
    Member

    Hi Brett
    They look very nice, do you run with the bottom fairing, I am looking photo 2 will that bottom clamp below the crankcase cover get in the way of the bottom fairing.
    JohnM

    March 11, 2016 at 12:15 am in reply to: New Replica Exhaust System #12772
    JohnM
    Member

    Hi Lads
    Thanks for the feedback, I’ll have to start saving now.
    JohnM

    March 10, 2016 at 12:08 pm in reply to: New Replica Exhaust System #12769
    JohnM
    Member

    Hi Keith
    I just had a quote from London Exhaust and they are quoting AU $1845.00 for header’s and mufflers delivered to West Australia. Looking at your photo is the quality as good as it look’s
    JohnM

    September 15, 2015 at 9:17 am in reply to: Front Wheel #12563
    JohnM
    Member

    Hi Wout & JohnS
    Job now done, it was bloody tight and the nut is still intact.
    JohnM

    September 1, 2015 at 12:29 am in reply to: New Owner of CB 1100 R #12549
    JohnM
    Member

    Hi Wout
    Thankyou,
    Regards
    JohnM
    .

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)